CAMP - Remove mold with nebulizer

This mold remover with nebulizer is the only active sanitizing formulation that acts instantly against molds, algae, fungi, mosses and lichens, eliminating all traces and preventing their proliferation. Perfectly whitens surfaces blackened by mold or greenish due to algae.

Remove mold with nebulizer

Remove Mold is easy to use, is suitable for both internal and external applications, acts effectively on walls, joints, joints and interstices of floors and wall coverings in kitchens, bathrooms, showers, sanitary ware, saunas, swimming pools, changing rooms, laundries, cellars, boxes, garages, ceilings, basements, closets, boiler rooms, courtyards, balconies, flower boxes, sidewalks, paths, statues, stone walls, etc. Effective to remove the blackening of mold that forms on the joints (sealant) of the fixtures due to condensation and on the sealants used for sanitary ware.

Remove mold, diluted in water, can also be used as a sanitizer for ordinary cleaning at home, for bathrooms, tiles, floors, sanitary ware, showers, bathtubs, swimming pools, etc. Also ideal in the marine maintenance sector to eliminate algae, mold and rust spots on sheets, cushions and sails.

Preparation of the mold remover:

Do not remove mold and algae present. Remove the layers of moss.

Application:

Unscrew the safety cap and screw on the nebulizer, taking care to keep the bottle in a vertical position. Spray on the surface to be treated and leave for a few minutes. Thoroughly rinse the treated surface with a sponge soaked in water, then wipe with a damp cloth. If the mold persists, repeat the operation.

After application, it is recommended to use Muffa Control Additivo in the subsequent painting treatment. This will allow to complete the treatment with an effective preventive action against the reappearance of the infestations.

If you want to obtain a sanitizing solution to clean and sanitize walls and surfaces, dilute Remove Mold with water (200-250 ml of product in 5 liters of water).

After use, unscrew the nebulizer, rinse it well with water and close the bottle carefully. Once opened, keep the bottle of Remove Mold in an upright position, away from light and heat.

Precautions:

Do not scrape or brush mold before use. Given the high efficacy of the product, to avoid problems of color variations of the surfaces and elastic joints (sealants), it is advisable to test their compatibility with the surface to be treated in advance. Do not use in combination with other products: development danger of harmful gases. Do not reuse the bottle. Avoid application and any splashes on clothing fabrics, plants, untreated metals, bright paints. Before spraying, always make sure that the nozzle is ready for use, opening it as indicated in the upper part. In case of contact, rinse immediately and abundantly with water.

Safety for the operator and the environment:

The use of suitable protective clothing and gloves is recommended during use. In case of poor ventilation wear a respiratory mask. Air the premises well during and after use. Keep out of reach of children. Before use, carefully read the information on the label. For further information consult the Safety Data Sheet available on request. Product for PROFESSIONAL USE.

Storage:

Store the package intact, upright, at room temperature, away from direct sunlight and moisture.