- Reduced price
EZVIZ - A3 - Kit - Alarm control unit
EZVIZ - A3 - Kit is an alarm control unit made up of EZVIZ T1C detection sensors, EZVIZ - T2C magnetic contacts for doors and windows, the EZVIZ A3 control unit (The gateway that makes your sensor system interfunctional) and the smart button Ezviz - T3C . This alarm unit is a good basis for starting to protect your home and/or business environments right away.If you need other sensors for home automation, click here .
Characteristics of the alarm control unit kit with sensors
- Easy pairing
- Easy setup via Aoo EZVIZ
- Integration with EZVIZ cameras
- Instant alarms on smartphone in case of detections
- Adhesive installation
- Energy-saving technology for long battery life
Choose the alarm ringtone you prefer
Basic kits
Create automatisms to have everything under control
EZVIZ - A3 - Alarm control unit
The EZVIZ - A3 alarm control unit is a home gateway for the control and protection of environments. It allows you to register up to 64 EZVIZ devices, sending notifications directly to your smartphone whenever a sensor detects an anomaly. Thanks to its small size of only 70x70 mm, the EZVIZ - A3 gateway can be installed anywhere, for example on a coffee table, a bedside table, in a bookcase or anywhere else as needed. You can connect it using an Internet cable or through your home network's Wi-Fi to enjoy consistent and reliable performance.Technical characteristics of Ezviz - A3
- Operating conditions: -10/+55 °C (+14/+131 °F) - humidity equal to or less than 95% (non-condensing)
- Power consumption: 3W (max.)
- Power Supply: Micro USB, DC 5V/1A
- Communication methods: RJ45 interface network cable, 2.4GHz Wi-Fi, ZigBee 3.0
T1C - Detection sensor
The EZVIZ - T1C motion detection sensor allows you to receive a notification on your Smartphone whenever movement is detected in a room. The installation is very simple, it can be done with tape.Technical characteristics of Ezviz - T1C
- Detection Type: Passive Infrared (PIR)
- Detection Distance: Up to 7m
- Detection angle: 90° horizontal, 90° vertical
- Installation methods: adhesive backed with magnetic parts. It supports wall-mounted and upside-down ceiling installation
- Battery type: CR2450
- Battery life: up to 2 years in energy saving mode
- Communication distance: <200m (tested in open environment)
- Operating conditions: -10/+55 °C (+14/+131 °F) - 95% or less humidity (non-condensing)
T2C - Magnetic contact for doors and windows
The EZVIZ - T2C Door and Window Magnetic Contact is suitable for most doors and windows in your home. It will allow you to remotely check if a door or window has remained open. When the alarm is armed, Ezviz - T2C will trigger the alarm if the door or window it was installed on is opened.Technical characteristics of Ezviz - T2C
- Trigger distance: 25mm wooden door / 15mm iron door
- Operating conditions: -10/+55 °C (+14/+131 °F) - Humidity equal to or less than 95% (non-condensing)
- Lithium battery life: up to 2 years (averaging 30 readings per day)
- Battery type: CR1632×2
T3C - Smart buttons
The EZVIZ - T3C smart button allows you to activate, deactivate the alarm system and its sensors with one click. It can be installed anywhere, or simply carried around in a pocket. In addition, the smart button can also be used as a device for asking for help.Technical characteristics of Ezviz - T3C
- Communication distance: < 200m (tested in open environment)
- Modes: arm/disarm mode, emergency button mode
- Operating conditions: -10/+55 °C (+14/+131 °F) - Humidity equal to or less than 95% (non-condensing)
- Installation: can be placed anywhere (adhesive back)
- Battery Type: CR2032
- Battery life: up to 2 years in energy saving mode
Box contents
- Home gateway A3
- Feeder for A3
- USB cable for A3
- T1C PIR sensor
- T1C pet shield
- T2C open/close sensor
- T3C smart button
- Double Sided Tape Strips (3)
- Regulatory information
- Fast guide
One app for all devices
All EZVIZ products can be viewed, configured and managed via the dedicated app, totally free, available for iOS and Android. By installing the EZVIZ app on your Smartphone, just scan the QR code to be online immediately.Download the app 
EZA3_KIT_Ezviz
Data sheet
- Diet
- Drums
- Connectivity
- Wireless and Wired
- Connectivity
- Gateways
Yes, without any limits. As for the devices that can be connected to the App, Ezviz does not set a maximum number of alarm control units that can be installed and configured under a single account.
A single app and an application for Windows
All Ezviz products can be viewed, configured and managed via the dedicated (free) app, available for iOS and Android. By installing the Ezviz app on your smartphone, just scan the QR code to be online immediately. If you want to view the recordings of your PC camera (for Windows only), frame the specific QR.
Download one of the applications
Does this answer your question?
Sorry about that
How can we improve it?
Thanks
Yes, through the “Detector-Telecamera” association. Both the detector and the camera must first be added to your account and be operational and online on the same Wi-Fi network. In case of alarm you will receive a video verification from the set camera.
- Select the detector;
- Select: "Camera Connection";
- Select: "Connection";
- Confirm with: "OK".
Every time you add a camera, turn the control unit off and on again, so that it can memorize the new device inserted. In this way the control unit will be able to combine it with one of the detectors.
A single app and an application for Windows
All Ezviz products can be viewed, configured and managed via the dedicated (free) app, available for iOS and Android. By installing the Ezviz app on your smartphone, just scan the QR code to be online immediately. If you want to view the recordings of your PC camera (for Windows only), frame the specific QR.
Download one of the applications
Does this answer your question?
Sorry about that
How can we improve it?
Thanks
You have no limits, this will allow you to create ecosystems of variable size based on your needs without any type of maximum constraint for adding devices.
A single app and an application for Windows
All Ezviz products can be viewed, configured and managed via the dedicated (free) app, available for iOS and Android. By installing the Ezviz app on your smartphone, just scan the QR code to be online immediately. If you want to view the recordings of your PC camera (for Windows only), frame the specific QR.
Download one of the applications
Does this answer your question?
Sorry about that
How can we improve it?
Thanks
You might also like
Wi-Fi Gateway + Sensors